14-42
Name Boolean Symbol Description Steps
Special setting instructions
Communica-
tion condi-
tions setting
Change the communication conditions for the COM port or
tool port based on the contents specified by the character
constant.
Password
setting
Change the password specified by the PLC based on the
contents specified by the character constant.
Interrupt
setting
Set the interrupt input based on the contents specified by
the character constant.
PLC link
time setting
Set the system setting time when a PLC link is used, based
on the contents specified by the character constant.
MEWTOCOL
-COM
response
control
Change the communication conditions of the COM. port or
tool port for MEWTOCOL-COM based on the contents
specified by the character constant.
High-speed
counter
operation
mode
changing
SYS1
Change the operation mode of the high-speed counter,
based on the contents specified by the character constant.
13
System
registers
“No. 40 to
No. 47”
changing
SYS2
Change the setting value of the system register for the PLC
link function.
7
To Next Page
Loading...
