Panasonic FP0 - Page 300

14-58
Name Boolean Symbol Description Steps
ANF= Connects a Form A (normally open) contact serially by
comparing two 32-bit data in the comparative condition
“(S1+1, S1)=(S2+1, S2)”.
9
ANF<> Connects a Form A (normally open) contact serially by
comparing two 32-bit data in the comparative condition
“(S1+1, S1)<(S2+1, S2)” or “(S1+1, S1)>(S2+1, S2)”.
9
ANF> Connects a Form A (normally open) contact serially by
comparing two 32-bit data in the comparative condition
“(S1+1, S1)>(S2+1, S2)”.
9
ANF>= Connects a Form A (normally open) contact serially by
comparing two 32-bit data in the comparative condition
“(S1+1, S1)>(S2+1, S2)” or “(S1+1, S1)=(S2+1, S2)”.
9
ANF< Connects a Form A (normally open) contact serially by
comparing two 32-bit data in the comparative condition
“(S1+1, S1)<(S2+1, S2)”.
9
Floating
point type
real number
data
compare
(AND)
ANF<=
Connects a Form A (normally open) contact serially by
comparing two 32-bit data in the comparative condition
“(S1+1, S1)<(S2+1, S2)” or “(S1+1, S1)=(S2+1, S2)”.
9