1.19 Voice Mail Features
158 Feature Guide
• The amount of time (inter-digit time) between each individual DTMF tone sent by the PBX can be
specified through system programming.
• The length of each DTMF tone sent by the PBX can be specified through system programming.
• By default, each extension's and ICD group's mailbox number is the same as its corresponding
extension number/floating extension number, however, a different mailbox number can be specified
through PBX system programming for each extension and ICD group. The specified mailbox number
will be used when "Mailbox for Extension" is set to "Programmed Mailbox Number".
• In order to achieve proper recording quality, Data Line Security is turned on automatically for extensions
in a VM (DTMF) group. (→ 1.10.5 Data Line Security)
Feature Guide References
1.1.1.4 Intercept Routing
1.3.1.2 Call Forwarding (FWD)
1.11.1 Call Transfer
1.18.2 Flexible Buttons
1.19.1 Voice Mail (VM) Group
User Manual References
1.9.5 Voice Processing System
To Next Page
Loading...
