Panasonic KX-TDA50

4.6 Help
308 Feature Guide
A • The IP-GW4 card requires both channels of a port to be set to "OUS"/"INS" together.
Q
When registering a Portable Station, I set an extension number, click the Select
cell to set it to ON (blue), and click Registration, but the registration process
does not execute.
A • After setting the extension number, click Apply to update the PBX with the change before
continuing.
Q
I cannot register Portable Stations using the method described in Portable
Station [1-2].
A • Is the status of the DHLC, HLC, or DLC card set to "INS"?
• Is a CS connected to the DHLC, HLC, or DLC card? If not, connect one.
• Do the PINs (Personal Identification Numbers) of the PBX and the Portable Station
match? Confirm that they are the same.
• Is the Portable Station within transmission range of the CS?
• Has the Portable Station previously been registered at another location?
It is not possible to register a Portable Station at 2 locations, so use the Forced De-
registration option to delete the previous registration.
Q
I cannot delete the extension number of a Portable Station.
A • First, de-register the Portable Station itself, and then delete the extension number.
Q
I cannot de-register a Portable Station.
A • Is the Portable Station turned on? If not, turn it on.
• Is the Portable Station within transmission range of the CS? If not, move it closer to the
CS and try the de-registration operation again.
Q
The Portable Station I want to de-register is broken, and will not turn on, or is
not available, or the registration information was deleted first from the Portable
Station, so it cannot be de-registered.
A • The Portable Station can be forcibly de-registered by the following steps.
1. In the Portable Station screen (see "4.7.9 Portable Station [1-2]"), click the Select
cell of the Portable Station you want to delete to set it to ON (blue).
2. Click Forced De-registration.
3. Confirm that the status changes to "None".
Q
I changed the extension number of a Portable Station, but the display of the
Portable Station still shows the old extension number.
A • Turn the Portable Station off and back on again, to force it to re-register its location.
Q
I changed the FCO of a Portable Station, but the display of the Portable Station
still shows the old FCO.
A • Turn the Portable Station off and back on again, to force it to re-register its location.
Q
If I delete the extension number of a Portable Station, and then turn the
Portable Station off and back on again, it does not function correctly.
A • Do not delete the extension number of the Portable Station.