Panasonic KX-TDA50

4.7 Configuration [1]
Feature Guide 325
Default
40 ms
Value Range
4 × n (n=3–15) ms
Programming References
4.7.1 Slot [1-1]
4.7.11 LCO Port [1-4]
Feature Guide References
None
High Speed Pulse Dial—Pulse % Break
Specifies the % break for a high speed pulse dial. This is the ratio between the break (on-hook) signal and
make (off-hook) signal in a pulse dial.
Default
60 %
Value Range
Other, 60 %, 67 %
Programming References
4.7.1 Slot [1-1]
4.7.11 LCO Port [1-4]
Feature Guide References
None
High Speed Pulse Dial—Break Width
Specifies the maximum length of the break signal in a high speed pulse dial. High Speed Pulse Dial—
Pulse % Break on this screen determines the value that can be specified here.
Default
32 ms
Value Range
4 × n (n=4–18) ms
Programming References
4.7.1 Slot [1-1]
4.7.11 LCO Port [1-4]