Panasonic KX-TDA50

4.7 Configuration [1]
326 Feature Guide
Feature Guide References
None
High Speed Pulse Dial—Make Width
Specifies the minimum length of the make signal in a high speed pulse dial. High Speed Pulse Dial—Pulse
% Break on this screen determines the value that can be specified here.
Default
20 ms
Value Range
4 × n (n=3–15) ms
Programming References
4.7.1 Slot [1-1]
4.7.11 LCO Port [1-4]
Feature Guide References
None
Pulse Type
Selects the type of pulse dial transmission appropriate to your area.
Default
Normal
Value Range
Normal, Sweden, New Zealand
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
Option Card Equipment—Option 1 and Option 2
Indicates the type of the card that is installed in the LCOT card (reference only).
Default
Current option card type
Value Range
None, Caller ID Card