Panasonic KX-TDA50

4.7 Configuration [1]
Feature Guide 343
Feature Guide References
2.1.1 Extension Port Configuration
Telephone Type
Indicates the connected telephone type (reference only).
The number of all connected telephones and Cell Stations can be viewed by clicking Port Type View.
Default
Current connected telephone type
Value Range
DPT(T76xx): KX-T7600 series DPT is connected.
DPT(Other): DPT other than KX-T7600 series is connected.
APT: APT is connected.
DSS: DSS Console is connected.
VM: VPS is connected.
SLT: SLT is connected (or no telephone is connected to the Super Hybrid, Hybrid or SLT port).
CS: CS is connected.
Programming References
4.7.15 Extension Port [1-5] Port Type View
Feature Guide References
2.1.1 Extension Port Configuration
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command as follows:
• Click the desired cell in the column.
• Use the arrow keys to select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the PBX.
Programming References
4.7.14 Extension Port [1-5] Port Command
Feature Guide References
None