Panasonic KX-UTG200

IPV6_DHCP_ENABLE
Value Format Boolean
Description Specifies whether to assign the IPv6 address automatically (DHCPv6)
or manually (static).
Value Range
• Y/Yes (Assigns IPv6 addresses automatically (DHCPv6))
• N/No IPv6 addresses are assigned manually (use
IPV6_STATIC_IP_ADDR, IPV6_STATIC_IP_PREFIX_LEN, and
IPV6_STATIC_DEFAULT_GATEWAY)
Default Value
Y
IPV6_DHCP_DNS_ENABLE
Value Format Boolean
Description Specifies whether to receive DNS server addresses automatically or to
assign the DNS server addresses (up to 2) manually.
Note
• This setting is available only when "IPV6_DHCP_ENABLE" is
set to "Y".
Value Range
• Y/Yes (Receives the DNS server address automatically)
• N/No (Use "IPV6_STATIC_DNS1_SERVER" and
"IPV6_STATIC_DNS2_SERVER")
Default Value
Y
IPV6_STATIC_IP_ADDR
Value Format String
Description Specifies the IPv6 address for the unit.
Note
• This setting is available only when "IPV6_DHCP_ENABLE" is
set to "N".
• When you specify this parameter, you must specify
"IPV6_STATIC_IP_PREFIX_LEN"
and "IPV6_STATIC_DEFAULT_GATEWAY" together in a
configuration file.
Value Range Max. 39 characters (IPv6 address)
Default Value Empty string
IPV6_STATIC_IP_PREFIX_LEN
Value Format Integer
272 Administrator Guide Document Version 2015-01
5.5.2 IPv6 Settings