Panasonic KX-UTG200

Description Specifies the prefix length of the IPv6 address for the unit.
Note
• This setting is available only when "IPV6_DHCP_ENABLE" is
set to "N".
• When you specify this parameter, you must specify
"IPV6_STATIC_IP_ADDR"
and "IPV6_STATIC_DEFAULT_GATEWAY" together in a
configuration file.
Value Range Max.128 characters
Default Value 0
IPV6_STATIC_DEFAULT_GATEWAY
Value Format String
Description Specifies the gateway IPv6 address for the unit.
Note
• This setting is available only when "IPV6_DHCP_ENABLE" is
set to "N".
• When you specify this parameter, you must specify
"IPV6_STATIC_IP_ADDR"
and "IPV6_STATIC_IP_PREFIX_LEN" together in a
configuration file.
Value Range Max. 39 characters (IPv6 address)
Default Value Empty string
IPV6_STATIC_DNS1_SERVER
Value Format String
Description Specifies the DNS1 server IPv6 address for the unit.
Note
• This setting is available only when "IPV6_DHCP_ENABLE" is
set to "N".
Value Range Max. 39 characters (IPv6 address)
Default Value Empty string
IPV6_STATIC_DNS2_SERVER
Value Format String
Document Version 2015-01 Administrator Guide 273
5.5.2 IPv6 Settings