Panasonic KX-UTG200

Web User Interface Reference Maximum RTP Port Number (Page 132)
RTP_PTIME
Value Format Integer
Description Specifies the interval, in milliseconds, between transmissions of RTP
packets.
Value Range
• 20
• 30
• 40
Default Value 20
Web User Interface Reference RTP Packet Time (Page 132)
OUTBANDDTMF_VOL
Value Format Integer
Description Specifies the volume (in decibels [dB]) of the DTMF tone using RFC
2833.
Value Range (-63)–0
Default Value -10
INBANDDTMF_VOL
Value Format Integer
Description Specifies the volume (in decibels [dB]) of in-band DTMF tones.
Value Range (-46)–0
Default Value -10
5.8.3 All Lines - Call Control Settings
RETURN_VOL_SET_DEFAULT_ENABLE
Value Format Boolean
Description Specifies whether the volume is returned to its default setting after each
call.
Value Range
• Y/Yes (Volume returns to the default setting after each call)
• N/No (Volume does not change after each call)
Default Value
N
318 Administrator Guide Document Version 2015-01
5.8.3 All Lines - Call Control Settings