Panasonic KX-UTG200

SIP_PASSWD_CHECK_SPECIAL_CHAR
Value Format Boolean
Description Specifies whether to check the special character for SIP authentication
password.
Note
• If "SIP_PASSWD_CHECK_SPECIAL_CHAR" is set to "Y",
blank spaces and the following characters are not allowed:
" & ' : < >
• If "SIP_PASSWD_CHECK_SPECIAL_CHAR" is set to "N", any
character is OK and special characters will not be checked.
Value Range
• Y/Yes (Checks the special characters for the SIP authentication
password)
• N/No (Does not check the special character for the SIP
authentication password)
Default Value
Y
5.9 Per Line Settings
5.9.1 Per Line - VoIP
CODEC_ENABLE_G722
Value Format Boolean
Description Specifies whether to enable G722 codec.
Value Range
• Y/Yes (Enable)
• N/No (Disable)
Default Value
Y
Web User Interface Reference G722 (Enable) (Page 137)
CODEC_ENABLE_PCMA
Value Format Boolean
Description Specifies whether to enable PCMA codec.
Value Range
• Y/Yes (Enable)
• N/No (Disable)
Default Value
Y
Web User Interface Reference PCMA (Enable) (Page 137)
Document Version 2015-01 Administrator Guide 319
5.9.1 Per Line - VoIP