EasyManua.ls Logo

Panasonic KX-UTG200

Panasonic KX-UTG200
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Web User Interface Reference G729A (Annexb) (Page 139)
DSCP_RTP
Value Format Integer
Description Selects the DSCP level of DiffServ applied to RTP packets.
Value Range 0–63
Default Value 0
Web User Interface Reference RTP Packet QoS (DSCP) (Page 134)
DSCP_RTCP
Value Format Integer
Description Selects the DSCP level of DiffServ applied to RTCP packets.
Value Range 0–63
Default Value 0
Web User Interface Reference RTCP Packet QoS (DSCP) (Page 134)
RTCP_INTVL
Value Format Integer
Description Specifies the interval, in seconds, between RTCP packets.
Value Range 5–65
Default Value 5
MAX_DELAY
Value Format Integer
Description Specifies the maximum delay, in 10-millisecond units, of the jitter buffer.
Value Range
3–50 (´ 10 ms)
Note
This setting is subject to the following conditions:
This value must be greater than "NOM_DELAY"
This value must be greater than "MIN_DELAY"
"NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
Default Value 20
322 Administrator Guide Document Version 2015-01
5.9.1 Per Line - VoIP

Table of Contents

Other manuals for Panasonic KX-UTG200

Related product manuals