Panasonic KX-UTG200

Web User Interface Reference Maximum Delay (Page 135)
MIN_DELAY
Value Format Integer
Description Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range
1 or 2 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be less than or equal to "NOM_DELAY"
– This value must be less than "MAX_DELAY"
– "MAX_DELAY" must be greater than "NOM_DELAY"
Default Value 2
Web User Interface Reference Minimum Delay (Page 135)
NOM_DELAY
Value Format Integer
Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than or equal to "MIN_DELAY"
– This value must be less than "MAX_DELAY"
Default Value 2
Web User Interface Reference Initial Delay (Page 135)
RTCP_ENABLE
Value Format Boolean
Description Selects whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
Value Range
• Y/Yes (Enable RTCP)
• N/No (Disable RTCP)
Default Value
N
Web User Interface Reference RTCP Enable (Page 134)
Document Version 2015-01 Administrator Guide 323
5.9.1 Per Line - VoIP