Panasonic KX-UTG200

Description Specifies whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
• You cannot set both "SHARED_CALL_ENABLE" and
"FEATURE_KEY_SYNCHRO_ENABLE" to "Y" at the same time.
• Availability depends on your phone system.
Value Range
• Y/Yes (Enable shared call)
• N/No (Disable shared call)
Note
• If set to "Y", the SIP server will control the line by using a
shared-call signaling method.
• If set to "N", the SIP server will control the line by using a
standard signaling method.
Default Value
N
Web User Interface Reference Enable Shared Call (Page 144)
CALLPARK_SUBSCRIBE_ENABLE
Value Format Boolean
Description Specifies whether to enable callpark event subscription after
registering.
Value Range
• Y/Yes (Enable callpark subscription)
• N/No (Disable callpark subscription)
Default Value
N
FEATURE_KEY_SYNCHRO_ENABLE
Value Format Boolean
Description Specifies whether to synchronize the Do Not Disturb and Call Forward
settings, configured via the Web user interface or phone user interface,
between the unit and the portal server that is provided by your phone
system dealer.
Note
• Even if you specify "Y", this feature may not function properly if
your phone system does not support it. Before you configure
this setting, consult your phone system dealer.
• You cannot set both "SHARED_CALL_ENABLE" and
"FEATURE_KEY_SYNCHRO_ENABLE" to "Y" at the same time.
Value Range
• Y/Yes (Enable Do Not Disturb/Call Forward synchronization)
• N/No (Disable Do Not Disturb/Call Forward synchronization)
Default Value
N
Document Version 2015-01 Administrator Guide 329
5.9.2 Per Line - Call Control Settings