Panasonic KX-UTG200

Web User Interface Reference Feature Key Synchronization (Page 145)
RESOURCELIST_URI
Value Format String
Description Specifies the Uniform Resource Identifier string for the resource list,
which consists of "sip:", a user part, the "@" symbol, and a host part,
for example, "sip:user@example.com".
For details, refer to RFC 4662.
Note
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
• When the BLF feature is assigned to a flexible button, it may be
necessary to specify this parameter depending on your phone
system. For details about flexible buttons, see 6.3 Flexible
Buttons.
Value Range Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Default Value Empty string
Web User Interface Reference Resource List URI (Page 145)
CW_ENABLE
Value Format Boolean
Description Specifies whether automatic call waiting is enabled.
Value Range
• Y/Yes (Enable Call Waiting)
• N/No (Disable Call Waiting)
Default Value
Y
BLOCK_CALLER_ID
Value Format Boolean
Description Specifies whether to make calls without transmitting the phone number
to the called party.
Value Range
• Y/Yes (Enable block caller ID)
• N/No (Disable block caller ID)
Default Value
N
Web User Interface Reference Block Caller ID (Page 147)
330 Administrator Guide Document Version 2015-01
5.9.2 Per Line - Call Control Settings