Panasonic KX-UTG200

Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_PROVISION
Value Format Integer
Description Specifies the debug level of the provision module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_SIP_PNP
Value Format Integer
Description Specifies the debug level of the sippnp module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_SWITCH_CONF
Value Format Integer
Description Specifies the debug level of the switch config module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_UPGRADER
Value Format Integer
Description Specifies the debug level of the upgrade module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
360 Administrator Guide Document Version 2015-01
5.10.3 Log Settings - Log Level