Panasonic KX-UTG200

LOG_LEVEL_CONFIGSYS
Value Format Integer
Description Specifies the debug level of the configuration system module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_DCM
Value Format Integer
Description Specifies the debug level of digit collect module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_FDT
Value Format Integer
Description Specifies the debug level of the fdt module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_NTP
Value Format Integer
Description Specifies the debug level of the ntp module.
Value Range 1-4095
• 4095 means all levels: VERB | IN | OUT | STATE | TIMEOUT |
SEMA | WARN | ERR | FATAL
Default Value 448 (WARN | ERR | FATAL)
LOG_LEVEL_FILESAVER
Value Format Integer
Description Specifies the debug level of the file saver module.
Document Version 2015-01 Administrator Guide 361
5.10.3 Log Settings - Log Level