590 Series DC Digital Drive The MAN - MACHINE INTERFACE (MMI) 6-3
Introducing the MMI
M
E
DC DIGITAL DRIVE
ISSUE 4.X
Health
Run
Start Contactor
Program Stop
Overcurrent Trip
Coast Stop
Figure 6-1 The Keypad
The built-in Man-Machine Interface (MMI) consists of a liquid crystal display, control keys and LEDs that allow full use of the drive’s features. The
Liquid crystal display can be seen through the hinged cover that protects the MMI. Lower the protective cover to see the control keys and LEDs.
The MMI provides for application programming and monitoring of the Drive for remote control.
Welcome Screen
On power-up, a self-calibration is displayed. This is quickly replaced by a default Welcome screen showing the product description and software
version of the Drive.
The display then changes to MENU LEVEL after a further 15 seconds (you can press the M key to display this screen immediately). This screen is at
the top of the MMI's menu system.
To Next Page
Loading...
