6-16 The MAN - MACHINE INTERFACE (MMI) 590 Series DC Digital Drive
ALARM STATUS
Refer to Chapter 7: "Trips and Fault Finding" for a list of all the alarms.
MENUS
Selecting a Menu Viewing Level
For ease of operation the MMI has three `viewing levels`: BASIC, STANDARD and ADVANCED. The
setting for the viewing level decides how much of the menu system will be displayed.
Refer to the The Menu System Map, page 6-8 to see how the viewing level changes the displayed menu.
To c
hange the viewing level, go to the MENUS menu. The VIEW LEVEL parameter in this menu selects the
viewing level.
• Select BASIC to see a reduced selection of parameters to operate the drive
• Select STANDARD to see the "standard" set of parameters
• Select ADVANCED to see the full menu system - useful when programming
Selecting the Display Language
There is an option to select a different display language.
The choice of display language is selected by the LANGUAGE parameter in the MENUS menu (menu view
must be set to ADVANCED).
Remember to perform a PARAMETER SAVE if you need the new language to be saved on power-down.
ENGLISH is the default language and is permanently saved (in Read Only Memory).
A second language is loaded (typically French), however German, Italian and Spanish are available by
contacting Parker SSD Drives. When a new language is downloaded it replaces the current second language.
PARAMETER SAVE
Refer to "Saving Your Application", page 6-21.
To Next Page
Loading...
