E-10 Technical Specifications 590 Series DC Digital Drive
Auxiliary Power Supply Details
* AC fans are used , thus the input voltage must be suitable for the fans supplied, either 110-120V ±10% or 220-240V ±10%.
Control and Fan*
Single phase, 50-60Hz, ±10%
Supply Voltage 110 - 120V ±10%
220 - 240V ±10%
DC Supply:
Power Board AH385851
+24V nominal internally regulated
Maximum output capability: 17W or 750mA
Power Board AH385128 +24V nominal internally regulated
Maximum output capability: 6W or 250mA
To Next Page
Loading...
