590 Series DC Digital Drive
Technical Specifications E-3
Technical Specifications
Caution
Always use an external ac line choke. Refer to “External AC Supply (RFI) Filters and Line Choke”.
Understanding the Product Code
The unit is fully identified using an alphanumeric code which records how the Drive was calibrated, its various settings when despatched from the
factory, and the country of origin.
The Product Code appears as the “Model No”. Each block of the Product Code is identified as below:
Model Number (Europe)
Block No. Variable Description
1 XXXX Generic product
590C : 3 phase 4 quadrant (regenerative) converter up to 720A
591C : 3 phase 2 quadrant (non-regenerative) converter up to 720A
2 XXXX Four digits identifying the maximum dc output current rating that may be calibrated for each size of
product:
0350 = 35A
0700 = 70A
1100 = 110A
1800 = 180A
2700 = 270A
3600 = 360A
4500 = 450A
7200 = 720A
3 X One digit identifying the nominal 3 phase ac power, supply voltage:
0 = 110V
1 = 115V
2 = 208V
3 = 220V
4 = 240V
5 = 380V
6 = 415V
7 = 440V
8 = 460V
9 = 480V
A = 500V
4 X One digit identifying the auxiliary ac control supply voltage:
0 = 110V
1 = 115V
3 = 220V
4 = 240V
To Next Page
Loading...
