3-34 Installing the Drive 590 Series DC Digital Drive
Speed Feedback Option Boards
Each option board below is shown with the correct selection for the SPEED FBK SELECT parameter.
The selections are ARM VOLTS FBK, ANALOG TACH, ENCODER and ENCODER/ANALOG.
(ARM VOLTS FBK is default and requires no option board).
WARNING
Isolate the drive before fitting or removing the options.
Microtach Option Board
ENCODER
There are two kinds of Parker SSD Drives’ Microtach, each requiring a different board:
5701 Microtach (plastic fibre)
5901 Microtach (glass fibre)
If fitted, refer to the Microtach Technical Manual for further information.
5701/5901 MICROTACH
OPTION BOARD
Board
Control
5701/5901 Microtach
MMI Menu Ma
To Next Page
Loading...
