D-8 Programming 590 Series DC Digital Drive
Function Blocks By Category
The function blocks described in this Appendix are arranged in alphabetical order, however, they are listed below by
Category. They each appear as a Menu in the FUNCTION BLOCKS menu. To view the FUNCTION BLOCKS Menu,
ADVANCED view level must be selected
Alarms
ALARM HISTORY D-17 ALARMS D-18
Communications
5703 IN D-12 MAIN PORT (P1) D-72 PNO CONFIG D-84
570
3 OUT D-13 miniLINK D-76 SYSTEM PORT (P3) D-120
Inputs & Outputs
ANALOG INPUTS D-23 AUX I/O D-28 DIGITAL OUTPUTS D-52
ANALOG OU
TPUTS D-25 DIGITAL INPUT D-49
Menus
MENUS D-72
Miscellaneous
ADVANCED D-14 DRIVE INFO D-55
CONFIGUR
E DRIVE D-32 LINKS D-67
DEM
ULITPLEXER D-40 MULTIPLEXER D-77
Motor Control
AUTOTUNE D-26 ENCODER D-56 INVERSE TIME D-68
CALIBRATIO
N D-29 FEEDBACKS D-58 PLL D-83
CURREN
T LOOP D-33 FIELD CONTROL D-60 SPEED LOOP D-105
CURREN
T PROFILE D-38 INERTIA COMP D-66
Seq & Ref
JOG/SLACK D-69 SEQUENCING D-99 STOP RATES D-117
RAMPS D-93 STANDSTILL D-115
Setpoint Funcs
DEADBAND D-39 PRESET SPEEDS D-85 SETPOINT SUM D-102
MIN S
PEED D-75 RAISE/LOWER D-90 SRAMP D-112
PID D-78
Winder
DIAMETER CALC D-41 PROFILED GAIN D-88 TORQUE CALC D-122
To Next Page
Loading...
