1-4 Getting Started 590 Series DC Digital Drive
Operation
Know your operator:
• how is it to be operated?
• what level of user is going to operate the unit?
• decide on the best menu level for the MMI
Programming
Know your application:
• plan your “block diagram programming”
• enter a password to guard against illicit or accidental changes
• learn how to back-up your application data
Equipment Inspection and Storage
• Check for signs of transit damage
• Check the product code on the rating label conforms to your requirement
If the unit is not being installed immediately, store the unit in a well-ventilated place away from high temperatures, humidity, dust, or metal particles.
Refer to Chapter 2: “Product Overview” to check the rating label/product code.
Refer to Chapter 8: “Routine Maintenance and Repair” for information on returning damaged goods.
Refer to Appendix E: “Technical Specifications” - Environmental Details for the storage temperature.
Packaging and Lifting Details
WARNING
The packaging is combustible. Igniting it may lead to the generation of lethal toxic fumes.
♦ Save the packaging in case of return. Improper packaging can result in transit damage.
♦ Use a safe and suitable lifting procedure when moving the unit. Never lift the unit by its terminal connections.
Prepare a clear, flat surface to receive the drive before attempting to move it. Do not damage any terminal connections when putting the unit down.
To Next Page
Loading...
