590 Series DC Digital Drive Serial Communications
A-5
UDP Support
The Upload Download Protocol (UDP) can be used to transfer text files between the drive and a host computer using the
P3 port. Files that can be transferred using UDP are configuration files, language files and text “dumps” of all the
parameters shown on the MMI.
Configuration files and language files are formatted as Intel Hex files. The files contain a copy of the drive’s configuration
and may be transferred either from the drive to the host computer, or from the host computer to the drive. Transferring a
configuration file to the drive will over-write all the drive’s settings.
Language files contain information required to display parameters on the Display/Keypad in a language other than English.
These may only be transferred from the host computer to the drive. Contact Parker for further information.
MMI dumps are human readable text files showing all the parameters in the drive in the order they are shown on the MMI.
The files can only be transferred from a drive to the host computer.
These parameters are ignored by the 590 and 590P version 9.x drives when receiving a configuration from an earlier version
of the 590 or 590P
18 AUTOTUNE AUTOTUNE 159 AUX PORT (P2) ERROR REPORT
120 MENUS ENTER PASSWORD 303 MAIN PORT (P1) OPTION VERSION
138 MAIN PORT (P1) GROUP ID (GID) 328 SYSTEM PORT (P3) ESP SUP.(ASCII)
139 MAIN PORT (P1) UNIT ID (UID) 331 SYSTEM PORT (P3) CHANGEBAND (BIN)
140 AUX PORT (P2) GROUP ID (GID) 332 SYSTEM PORT (P3) ERROR REPORT
141 AUX PORT (P2) UNIT ID (UID) 333 SYSTEM PORT (P3) PNO.7
142 MAIN PORT (P1) PNO.7 334 MAIN PORT (P1) PARITY
143 AUX PORT (P2) PNO.7 499 MAIN PORT (P1) OPTION ADDRESS
144 MAIN PORT (P1) CHANGEBAND (BIN) 536 SEQUENCING REM.SEQUENCE
145 AUX PORT (P2) CHANGEBAND (BIN) 543 CALIBRATION ZERO CAL INPUTS
146 MAIN PORT (P1) ENABLED 555 CALIBRATION SCALE CAL INPUTS
147 AUX PORT (P2) ENABLE 609 AUTOTUNE METHOD
148 MAIN PORT (P1) MODE
149 AUX PORT (P2) MODE
150 MAIN PORT (P1) BAUD RATE
151 AUX PORT (P2) BAUD RATE
152 MAIN PORT (P1) ESP SUP.(ASCII)
153 AUX PORT (P2) ESP SUP.(ASCII)
158 MAIN PORT (P1) ERROR REPORT
To Next Page
Loading...
