E-12 Technical Specifications 590 Series DC Digital Drive
Printed Circuit Board Types
Power Board Part No. Product Used On Power Range Input Voltage (3 phase) Input Frequency Aux Supply (single phase)
AH385851U002
AH385851U005
590, 4 quad, high voltage option
590, 4 quad, low voltage option
35A to 270A
35A to 270A
220 to 500V
110 to 220V
50/60Hz
50/60Hz
110V/240V ac
110V/240V ac
AH385851U003
AH385851U004
591, 2 quad, high voltage option
591, 2 quad, low voltage option
35A to 270A
35A to 270A
220 to 500V
110 to 220V
50/60Hz
50/60Hz
110V/240V ac
110V/240V ac
AH385128U009
AH385128U009
598, external stack
599, external stack
--
--
--
--
50/60Hz
50/60Hz
110V/240V ac
110V/240V ac
Power Board AH385128U009 operates with Trigger Board AH055036U003 and Suppression Board AI386001
Auxiliary Amps
AH385851
Internal PSU/Fans/Contactor : 4A fused at FS2
Power Terminals
Terminal Description Terminal Function Signal Level Terminal Number
Mains Supply L1 Three phase mains power input,
phase reference Line 1
500Vac maximum 50-60Hz
line-to-line
L1
Mains Supply L2 Three phase mains power input,
phase reference Line 2
500Vac maximum 50-60Hz
line-to-line
L2
Mains Supply L3 Three phase mains power input,
phase reference Line 3
500Vac maximum 50-60Hz
line-to-line
L3
Armature connection positive Converter dc power output,
reference Armature Positive
connection to dc motor
600Vdc maximum with respect to A- (maximum voltage dependent
upon the supply voltage, the ratio being:
Vout is approximately equal to 1.2Vac supply)
A+
Armature connection negative Converter dc power output,
reference Armature Negative
connection to dc motor
600Vdc maximum with respect to A+ (maximum voltage dependent
upon the supply voltage, the ratio being:
Vout is approximately equal to 1.2Vac supply)
A-
To Next Page
Loading...
