6-20 The MAN - MACHINE INTERFACE (MMI) 590 Series DC Digital Drive
Menu Shortcuts and Special Key Combinations
Quick Tag Information
Hold down the M key for approximately ½ second in any Menu System parameter to display the Tag
number for that parameter.
Resetting to Factory Defaults (2-button reset)
Power-up the drive holding down the ‘ ’ and ‘ ’ keys (or all four keys).
The drive is now safely configured with the default settings detailed in this manual.
The default configuration is not automatically saved to non-volatile memory, so you must perform a
PARAMETER SAVE (refer to "
Saving Your Application", page 6-21).
To Next Page
Loading...
