PIAGGIO Beverly 500 i.e. - Page 20

AFTER 24,000 KM
255'
Action
Engine oil - change
Hub oil - change
Spark plug / electrode gap - replacement
Air filter - cleaning
Engine oil filter - change
Fuel filter - check
Carburetion - check/adjust
Seals/injection system hoses - visual check
Base vent - check
Variable speed rollers - replacement
Roller support sliding blocks - check/change
Driven pulley bushing - check / grease
Drive belt - replacement
Coolant level - check
Steering - adjustment
Brake levers - greasing
Transmission - lubrication
Brake fluid level - check
Safety fasteners - check
Suspensions - check
Electrical system and battery - check
Headlight - adjustment
Tyre inflation and wear - Check
Vehicle test and brake test - Road test
AFTER 30,000 KM, 42,000 KM AND 66,000 KM
80'
Action
Engine oil - change
Hub oil - level check
Spark plug / electrode gap - check
Air filter - cleaning
Engine oil filter - change
Base vent - check
Variable speed rollers - replacement
Drive belt - check
Coolant level - check
Brake fluid level - check
Electrical system and battery - check
Tyre inflation and wear - Check
Vehicle test and brake test - Road test
AFTER 36,000 KM
365'
Action
Engine oil - change
Hub oil - level check
Spark plug/electrode gap - replacement
Air filter - change
Engine oil filter - change
Valve clearance - check
Carburetion - check/adjust
Seals/injection system hoses - visual check
Base vent - check
Variable speed rollers - replacement
Roller support sliding blocks - check/change
Drive belt - replacement
Coolant level - check
Radiator - external cleaning/ check
Steering - adjustment
Maintenance Beverly 500 i.e.
MAIN - 20