PIAGGIO Beverly 500 i.e. - Refitting the Rear Wheel; Swing-Arm

- Loosen the five gear shaft fastening nuts using
the rear brake.
Refitting the rear wheel
- For reassembly, perform the previous operations in the reverse order
Locking torques (N*m)
Wheel fastening screws 33 - 37
Swing-arm
Removal
•
Remove the helmet compartment.
•
Remove the air filter.
•
Remove the rear mudguard.
•
Remove the nut and the washer
mounting the swinging arm/engine pin
and tie rod.
Beverly 500 i.e. Suspensions
SUSP - 273