User’s Manual
Figure 4-2-5: Add/Edit User Configuration page Screenshot
The page includes the following fields:
Object Description
• Username
A string identifying the user name that this entry should belong to. The allowed
string length is 1 to 31. The valid user name is a combination of letters, numbers
and underscores.
• Password
The password of the user. The allowed string length is 1 to 31.
• Password (again)
Please enter the user’s new password here again to confirm.
• Privilege Level
The privilege level of the user.
The allowed range is 1 to 15. If the privilege level value is 15, it can access all
groups, i.e. that is granted the fully control of the device. But others value need to
refer to each group privilege level. User's privilege should be same or greater
than the group privilege level to have the access of that group.
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the Users.
: Delete the current user. This button is not available for new configurations (Add new user)
By default setting, most groups’ privilege level 5 has the read-
only access and privilege level 10 has the
read-write access. And the system maintenance (software upload, factory defaults, etc.) needs
privilege level 15.
To Next Page
Loading...
Need help?
General
