Polyend Tracker - Sample Playback Overview

A number of effects are available in Tracker.
Some can be set in the FX1 and FX2 slots and
some used in Performance Mode. Also the
instrument parameters give access to
instrument level effects. This section covers
the Master Effects. These are the common
effects that are available in the main audio
chain and are located in the master page.
Effects in the primary audio chain are called
insert effects. Effects are not available on an
individual track basis so all tracks are routed
through the master section. The track mixer is
also a page in the master section. An example
of an insert effect is the EQ effect. Send effects
allow variable amounts of audio to be
channelled in parallel to the main mix to the
effect. Essentially these are the reverb and
delay effects. The main reverb and delay effect
settings are accessible from the master page
and the send amounts in the global mixer. The
three pages including the main mix page, track
mixer page and global mixer functions are
available by pressing the [Master] button. Sub
pages are contained within, or parameters are
available directly from the master page. The
master effects have a number of parameters and
dened functions. It is always worth
remembering that adjustment by ear is usually a
more appropriate method when adjusting effect
settings. While theoretical numbers and
applications are good starting points, there is no
better method than to hear how the sound is
affected by adjustments as they are applied.
Master Effects
10
225
Polyend Tracker Manual
224
Polyend Tracker Manual
NOTES