57
Polyend Tracker Manual
56
Polyend Tracker Manual
NOTESNOTES
Pattern Format
4
Pattern Format
4
4.6 Pattern Mode Page Layout Options.
Pattern and step editing is performed in ‘Pattern’ Mode, selected by
pressing the [Pattern] button. To edit steps, select [Rec]. The view in pattern
mode can be changed in the cong options.
Track 1
– – – C5 – – – – – – – – – – – – – – – – – –
– – – C5 C4 D2 – – – – – – – – – – – –
– – – – – – C4 – – – – – – – – – – – – – – –
Track 5Track 3 Track 7Track 2 Track 6Track 4 Track 8
Track 1
– – – – – –
– – – – – –
C5 C5
1 2
– – – – – –
– – – – – –
C5 C5
– – – – – –
– – – – – –
Track 2
Track 1
– – – – – –
– – – – – –
C5 C5
– – – – – –
– – – – – –
C5 C5
– – – – – –
– – – – – –
Track 2
Press [Up] or [Down] or Turn (Jog) to navigate
vertically in the Tracker grid. Cursor will wrap
past the end to the start when using arrow keys
Press [Shift] + [Insert / Home] to reset
the cursor position to the start, step 1
Step Row
Change the pattern info for the top bar in the
Cong settings: General > Pattern top info.
Top bar: Off, Tracks Only or additional Info
Switch to 8 Track view.
Displays a single element across all 8 tracks
[Pattern] + [Note] - Displays all 8 tracks, with only the note parameters
[Pattern] + [Instrument] - Displays all 8 tracks, with only the instrument parameters
[Pattern] + [FX1] - Displays all 8 tracks, with only FX1 parameters
[Pattern] + [FX2] - Displays all 8 tracks, with only FX2 parameters
Hold [Pattern] + A combo of max 2 parameter buttons: Note, Instrument, FX1, FX2 to
display 2 parameters per track across 8 tracks.
Press [Pattern] to return to 4 tracks, all step parameters
To select a step
Press [Left] or [Right] to navigate
horizontally in the Tracker grid
Pattern
1
1 1
2
C5 40 ---- P-25
C5 40 ----
C5 40 ---- P-25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
P 25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
C5 02 ---- P-20
C5 40 ---- H-25
C4 12 ---- A 4
C5 40 ---- P-20
C5 40 ---- P-25
C5 40 ---- P-25
2
3 3
4 4
5 5
6 6
7 7
9 9
11 11
13 13
15 15
8 8
10 10
12 12
14 14
Length
32
Step Jump
0
Fill Preview Undo Redo More
Track 2 Track 3 Track 4Track 1
Pattern 1 0m:00s P1.008 1.Analog 3 18p
Pattern
1
1 1
2
C5 40 ---- P-25
C5 40 ----
C5 40 ---- P-25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
P 25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
C5 02 ---- P-20
C5 40 ---- H-25
C4 12 ---- A 4
C5 40 ---- P-20
C5 40 ---- P-25
C5 40 ---- P-25
2
3 3
4 4
5 5
6 6
7 7
9 9
11 11
13 13
15 15
8 8
10 10
12 12
14 14
Length
32
Step Jump
0
Fill Preview Undo Redo More
Track 2 Track 3 Track 4Track 1
Pattern 1 0m:00s P1.008 1.Analog 3 18p
The ‘top down’ view can be changed
to ‘left right’ in the Cong settings;
General > Pattern Arrangement
▌ NAVIGATING THE PATTERN MODE EDITOR PAGE
1. Press [Pattern] to select the pattern mode page.
2. The step cursor will display a green border with the selected step
parameter highlighted green in normal playback mode. This indicates
the step in focus and current playhead position.
3. To move the position vertically, Press [Up] or [Down]. The selection will
scroll and will wrap at the end of the pattern back to the top. Also Turn
(Jog) to navigate up and down within the step range.
4. To move the position horizontally across tracks, or Press [Left] or
[Right]. The selection will scroll across the 1-4 visible tracks and switch
across tracks 5-8 at the right of the page. This view is default.
5. Press [Shift] + [Up], [Down], [Left] and [Right] to select rather than just
navigate a range of steps.
6. To return the playhead / step selector to the top step 1 of the pattern,
Press [Shift] + [Insert / Home] when the sequencer is stopped.
▌ CHANGING FROM 4 TO 8 TRACK VIEW
1. By default the pattern page display 4 tracks. This can be changed to
display 8 tracks with a various step options:-
• 8 Tracks with only Note parameter: Press [Pattern] + [Note].
• 8 Tracks with Instrument parameter: Press [Pattern] + [Instrument].
• 8 Tracks with only FX1 parameter: Press [Pattern] + [FX1].
• 8 Tracks with only FX2 parameter: Press [Pattern] + [FX2].
• 8 Tracks with 2 selected parameters: Press [Pattern] + [P1] + [P2],
where ‘P1’ and ‘P2’ are 2 from; [Note], [Instrument], [FX1], FX2].
• Revert to 4 track mode, Press [Pattern]
To Next Page
Loading...
