145
Polyend Tracker Manual
144
Polyend Tracker Manual
7.12 Gate Length
1
9
5
13
16
D6 03
----
q 80
D6 03
---- ----
D6 03
---- ----
D6 03
---- ----
D6 03
---- ----
Gate Full Range
100%0%
Gate Length
Note On
Envelope
The gate operates in
conjunction with the ADSR
instrument envelope.
NOTESNOTES
7.11 Micro Move
1
9
5
13
16
D6 03
----
m 0
D6 03
----
m 25
D6 03
---- ----
D6 03
----
m 50
D6 03
---- ----
0%
Nudge
Forward
(Later)
100%
1 5 9 132 6 10 143 7 11 154 8 12 16
Per Step
While the range is 0-100%, the actual shift of notes is only in small amounts.
The 0% setting is ‘On Grid’ while any nudge is forward in the pattern.
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
m
0 - 100%
Will apply a small offset to the note step. This will move the note forward by an
amount based on the setting.
Can be used to offset one part of a track step or provide minor step variations.
Think of this similar to swing, but applied to a step rather than pattern.
Micro Move
Pad 1 = 0%, Pad 13 = 25%, Pad 25 = 51%, Pad 37 = 76%,
Pad 48 = 100%
FX Steps
7
FX Steps
7
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
q
0 - 100%
Adjusts the length of the note gate and helps shape the sound. Operates in
conjunction with the instruments Envelope settings which are found in the
‘Instrument’s Parameters’.
Increases or reduces the gate for the note. This works with the envelope and
will determine length of note helping to shape the sound over time.
Gate Length
Pad 1 = 0%, Pad 13 = 25%, Pad 25 = 51%, Pad 37 =
76, Pad 48 = 100%
To Next Page
Loading...
