Polyend Tracker - Micro-Tune

279
Polyend Tracker Manual
278
Polyend Tracker Manual
System
13
System
13
NOTESNOTES
13.5 User Interface Style.
The ability to change the display and pad style is available in the
conguration setting. This may be useful when working in different
environments and essentially is based on personal taste.
▌ CHANGING USER INTERFACE STYLE
1. Press [Cong].
2. Navigate using the screen buttons to the ‘General’ menu option.
3. In the central sub menu, four user interface elements exist:-
• Display Brightness. Options are High (default), Medium and Low.
• Display Theme. Options are Original (default) or Monochrome.
• Display Font. Font for text. Options are original (default) or new.
• Pads Brightness. Options are High (default), Medium and Low.
4. To change the setting highlight the desired sub menu option using the
screen buttons or arrow keys.
5. Press [Change], 6
th
Screen button option. The available options as
listed above are presented. Use the screen navigation or arrows to
select the desired option.
6. Press [Apply], 6
th
Screen button option to conrm the selection.
7. The desired setting will be visible on the screen or pads.
13.6 Screen Capturing
The ability to capture screen images from the currently displayed page is a
built in feature of Tracker.
▌ SCREEN GRAB OF CURRENT IMAGE
1. Select the page to capture.
2. Press [Shift] + On/Off Button. This is the power on button at the rear of
the unit. This action is not accompanied by any visual or audible
acknowledgement of capture being completed.
3. The screen will be captured and saved onto the SD card as a .BMP
image le in the snapshots folder.
Sub Folders
Screen Captured Files
RGB 800 x 480 Windows BMP Format
SD Card
/Root Directory
/Snapshots
Snapshot_001.bmp
Snapshot_002.bmp
Snapshot_003.bmp
Snapshot_004.bmp
Snapshot_005.bmp
Snapshot_006.bmp