EasyManua.ls Logo

Polyend Tracker - None

Polyend Tracker
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
271
Polyend Tracker Manual
270
Polyend Tracker Manual
Performance Mode
12
Performance Mode
12
NOTESNOTES
12.9 Advanced Pattern Playback
The simple option is to press [Play] to start and stop pattern playback.
During playback a number of ‘on-the-y’ pattern changes can be performed.
This is more useful when improvising and performing.
▌ PLAYING PATTERNS - REFRESHER
1. Press [Pattern] to select the Pattern page.
2. Press [Play] to play the current pattern.
3. Press [Play] to pause / stop a currently playing pattern.
4. Press [Song] + [Play] to play a song.
5. Hold [Song] to temporarily display the song page of press [Song] to
switch to the song page from the pattern page.
6. Hold [Shift] + [Track x] Screen button to mute or unmute a track.
▌ PLAYING PATTERNS - ADVANCED PLAYBACK
1. Press [Pattern] to select the Pattern page.
2. Press [Play] to play the current pattern.
3. Hold [Pattern], 1
st
Screen button to check available patterns,
represented by lit pads.
4. To sequentially change the pattern on the y:
Press [Pattern] + [Left] or [Right] buttons to select a new pattern.
This will initiate a sequential pattern change which awaits the end of
the current pattern before switching to the new pattern selection.
Pattern text for the screen button ashes red when cued.
Press [Pattern], 1
st
Screen button + [Left] or [Right] buttons to select
a new pattern. This will initiate a sequential pattern change which
awaits the end of the current pattern before switching to the new
pattern selection. Pattern text for the screen button ashes red
when cued.
4. To immediately change the pattern on the y:
Press [Pattern] + [Up] or [Down] buttons to select a new pattern.
The (Jog) wheel can be used instead of the arrow keys. This will
initiate a pattern change immediately.
Press [Pattern], 1
st
Screen button + [Up] or [Down] buttons to select
a new pattern. The (Jog) wheel can be used instead of the arrow
keys. This will initiate a pattern change immediately.
Press [Pattern], 1
st
Screen button + [PAD], for the new pattern. This
will initiate a pattern change immediately.

Table of Contents

Other manuals for Polyend Tracker

Related product manuals