95
Polyend Tracker Manual
94
Polyend Tracker Manual
5.10 FX Step Parameters
Each step event has two FX slots which can be populated from a library of
effects. Each FX has two parts, rstly the effect type, represented by a
single character and secondly it’s value.
FX Summary
NOTESNOTES
Sequencing Steps
5
Sequencing Steps
5
FX1 & FX2 parameter each has a dedicated
button when working in the pattern.
FX1 FX2
FX are the third and fourth parameters in the
step event and are highlighted when selected.
FX Type
FX Value
Pads are used to populate an FX step event. Also it is
possible to use (Jog) & [Up], [Down], [Left], [Right]
Pads assign a step event FX Type and/or the
FX Value based on the [PAD] selected.
Note PatternFX1
Instrument
FX2
C5 02 V 10
V 10
P 25
▌ DETAILED APPLICATION OF AN EFFECT TO AN EMPTY STEP
1. Press [Pattern] to select the pattern mode page.
2. Select a blank or existing step event.
3. Press [FX1] or [FX2] to ensure the FX parameter is selected in the step
event. This is a short press - do not hold [Instrument] otherwise this will
only temporarily select the parameter while being held.
4. Select recording mode, Press [Rec]. The steps selected will appear red
as opposed to green when in normal playback mode.
5. To assign FX either:-
• Press [PAD]
• If the step is empty it will apply both the chosen FX and also it’s
value which is based on the pad selected.
• If the step is occupied, the existing FX type is retained but a
value represented by the pad selected will be applied.
• Hold [FX1] or [FX2] + [PAD]. The pad selected will refer to the FX
type applied with a default value. When [FX1] or [FX2] is released
the effect is applied.
• Hold [FX1] or [FX2] + Turn (Jog). The FX type is selected with a
default value. When [FX1] or [FX2] is released the effect is applied.
• Hold [FX1] or [FX2] + Press [Up] or [Down]. The FX type is selected
with a default value. When [FX1] or [FX2] is released the effect is
applied. Using [Left] and [Right] will navigate in large steps.
• Hold [FX1] or [FX2] alone. The current FX type is selected with a
default value. When [FX1] or [FX2] is released the effect is applied
6. The FX1 will be displayed with the colour magenta and FX2 will be
displayed with light blue coloured text.
7. Turning (Jog) on the highlighted FX slot will now adjust its value. This
may also automatically preview the effect applied sound.
In the Effect window, press the 7
th
and 8
th
screen button to toggle the description
of the highlighted effect on or off. This is an aid to using the FX.
Render
Selection
1 1
2
C5 40 ---- P-25
C5 40 ---- P-25
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
-- --- ---- ---- -- --- ---- ---- -- --- ---- ---- -- --- ---- ----
C5 02 ---- P-20
C5 40 ---- H-25
C4 12 ---- A 4
C5 40 ---- P-20
C5 40 ---- P-25
C5 40 ---- P-25
2
3 3
4 4
5 5
6 6
7 7
9 9
11 11
13 13
15 15
8 8
10 10
12 12
14 14
Paste
Pattern
Expand
Pattern
Copy
Pattern
Duplicate
Pattern
Invert MoreShrink
Pattern
Pattern 1 0m:00s P1.008
Fx
- - None
Sets the Volume of an
Instrument. For MIDI
instruments this sends
the NOTE ON velocity
parameter
From 0% - 100%
! - Off
P - Panning
M - Micro Tune
G - Glide
T - Tempo
I - Swing
m - Micro Move
q - Gate Length
C - Chance
R - Roll
A - Arp
n - Random Note
i - Random Instrument
V - Volume
Description
To Next Page
Loading...
