97
Polyend Tracker Manual
96
Polyend Tracker Manual
FX Types.
The two FX slots can be populated from a library of FX effects. Each FX
has an effect type plus the associated value.
FX Type Description
-
None. Empty FX1 or FX1 effect. No effect applied.
!
Off. Will toggle off the effect used on the prior effect step.
V
Volume or Velocity (NOTE OFF) for MIDI.
P
Positions the step sound left / right in the stereo plane.
M
Micro Tune. Fine pitch tuning of note and MIDI Out.
G
Glide time from previous to current note - based on the note pitch.
T
Tempo change. Changes the pattern tempo.
I
Swing. Applies a swing from any step track for the entire pattern.
m
Micro move nudges forward by a small amount the step position.
q
Gate length. Adjusts the step note gate length.
C
Chance is the probability of a note playing.
R
Roll, beat repeats the note also with options for volume or pitch inc/dec.
A
Arpeggiator, for creating pitch based melodies. (Also needs MIDI Chord)
n
Random note. Sets a range of notes for random playback.
i
Random instrument. Sets a range of instruments for random playback.
f Random FX. Sets a random FX to the step from a selected range.
v Random Volume. Sets a random velocity variation on each cycle
r
Reverses sample playback. Played end to start.
p
Sets the playback position for a sample start, wavetable or granular position
S
Plays the selected slice for the step - sliced samples
g Volume LFO Rate
h Panning LFO Rate
j Filter LFO Rate
k Position LFO Rate
I Finetune LFO Rate
FX Type Description
D
Overdrive amount for the step
L
Low Pass Filter Cutoff. Frequency represented by 0-100%
B
Low Pass Filter Cutoff. Frequency represented by 0-100%
H
Low Pass Filter Cutoff. Frequency represented by 0-100%
s
Delay. Amount of send effect 0-100%
t
Reverb. Amount of send effect 0-100%
E
Bit depth. 4 Bits to 16 Bits.
U
Tuning. -24 semitones to +24 Semitones. 4 Octave range.
F
Slide up amount. Range is 0-255 with 1/16
th
semitone increments.
J Slide down amount. Range is 0-255 with 1/16
th
semitone increments.
a MIDI Out (CC, PC, Chan & Poly Aftertouch). Needs a channel & Instrument
b MIDI Out (CC, PC, Chan & Poly Aftertouch). Needs a channel & Instrument
c MIDI Out (CC, PC, Chan & Poly Aftertouch). Needs a channel & Instrument
d MIDI Out (CC, PC, Chan & Poly Aftertouch). Needs a channel & Instrument
e MIDI Out (CC, PC, Chan & Poly Aftertouch). Needs a channel & Instrument
f MIDI Out (CC, PC, Chan & Poly Aftertouch). Needs a channel & Instrument
0 MIDI Chord, note output. (Used also with Arp).
NOTESNOTES
Sequencing Steps
5
Sequencing Steps
5
To Next Page
Loading...
