Polyend Tracker - Manual Recording Steps

137
Polyend Tracker Manual
136
Polyend Tracker Manual
NOTESNOTES
7.3 None
1
9
5
13
16
D6 03
---- ----
----
----
----
----
D6 03
----
D6 03
----
D6 03
----
D6 03
----
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
-
N/A
No effect is applied and hence the sound for the step will purely be based on
the instrument and note. This is basically an empty effect.
Default state for any step is that the FX1 and FX2 are empty. This effect can
be applied to remove an existing FX and reset to the normal empty state.
None - No FX Applied
FX1 FX2
The last two slots are for FX. They will be
indicated with dashed lines when empty. This is
the default empty state of a step.
Selected step will be bounded green or red in
recording edit mode. The part of the step to be
edited is solid lled when selected as per
illustration where FX1, Step 1 is shown selected.
N/A
FX Steps
7
FX Steps
7
7.4 Off
FX Type Tag
Value Ranges
FX Description
Example
Effect
Pad Range
!
On
Will deactivate an effect that has been triggered on a prior step.
A roll triggered on step 1 will be audible over the subsequent following steps.
Applying an !OFF step command afterwards will curtail the effect for the track.
Off
Any pad will apply the Off command
1 1
3 3
2 2
4 4
5 5
D6 03
----
RR 6 D6 03
----
RR 6
D6 03
----
!OFF D6 03
----
D6 03
----
D6 03
----
D6 03
----
D6 03
----
D6 03
----
D6 03
----
Effect Applied
Effect Curtailed
Effect in Play
(!OFF Pending)
Effect in Play
(No !OFF)
---- ----
---- ----
----
---- ----