Polyend Tracker - Project Overview; Opening & Saving a Project - File Menu

59
Polyend Tracker Manual
58
Polyend Tracker Manual
NOTESNOTES
Pattern Format
4
Pattern Format
4
▌ CHANGING BETWEEN VERTICAL AND HORIZONTAL VIEW MODE
1. The default mode is for Tracker to display patterns top to bottom in a
vertical arrangement. This is the traditional and expected view for
trackers in general. This can be changed to an Horizontal left to right
view. This is less common but may suit people more accustomed to
more modern DAW arrangements.
2. Press [Cong] to open the project conguration menu.
3. Ensure the left window is highlighted red i.e. in focus. Navigate windows
by pressing [Left] or [Right]. Menu windows will automatically be
selected when pressing the relevant screen keys below the window to
navigate [Up] or [Down].
4. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box the
‘General’ option. Alternatively press the relevant screen keys below the
window to navigate [Up] or [Down].
5. Highlight red the General options window. Navigate windows by
pressing [Left] or [Right]. Menu windows will automatically be selected
when pressing the relevant screen keys below the window to navigate
[Up] or [Down].
6. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box over
the ‘Pattern Arrangement’ option. Alternatively press the relevant screen
keys below the window to navigate [Up] or [Down].
7. To change the options between horizontal and vertical views, Press
[Change]. The parameter pop-up window listing the available options
will appear.
8. Turn (Jog) or Press [Up] / [Down] or [Up] / [Down] Screen Buttons to
highlight the desired option.
• Vertical - Tracks scroll top to bottom (default).
• Horizontal - Track scrolls left to right.
9. Press [Apply] - 6
th
from left screen button to conrm selection or
[Cancel] - 3
rd
from left screen button to exit without changing.
10. The display will reect the selected option.
▌ CHANGING PATTERN TOP INFO DETAILS
1. The default mode is for Tracker to display an information bar plus the
tracks at the top of the pattern display. This can be changed to give
more clarity to the tracker pattern grid.
2. Press [Cong] to open the project conguration menu.
3. Ensure the left window is highlighted red i.e. in focus. Navigate windows
by pressing [Left] or [Right]. Menu windows will automatically be
selected when pressing the relevant screen keys below the window to
navigate [Up] or [Down].
4. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box the
‘General’ option. Alternatively press the relevant screen keys below the
window to navigate [Up] or [Down].
5. Highlight red the General options window. Navigate windows by
pressing [Left] or [Right]. Menu windows will automatically be selected
when pressing the relevant screen keys below the window to navigate
[Up] or [Down].
6. Press [Up] [Down] or Turn (Jog) to highlight with the bounding box over
the ‘Pattern Top Info’ option. Alternatively press the relevant screen
keys below the window to navigate [Up] or [Down].
7. To change the select between horizontal and vertical views, Press
[Change]. The parameter pop-up window listing the available options
will appear.
8. Turn (Jog) or Press [Up] / [Down] or [Up] / [Down] Screen Buttons to
highlight the desired option.
• Off - No information is displayed at the top of the page.
• Track Info Only - Only display the track number / name information.
• Additional Info: Display tracks, and upper bar expanded information,
such as time, transport, pattern, instrument etc. This is default.
9. Press [Apply] - 6
th
from left screen button to conrm selection or
[Cancel] - 3
rd
from left screen button to exit without changing.
10. The display will reect the selected option.