Polyend Tracker - SD Card Structure

45
Polyend Tracker Manual
44
Polyend Tracker Manual
Menu Option Description Book Section
General Recording Options
Sets the options for what is recorded i.e. notes,
quantization, micro-timing, velocity.
Sequencing
Steps
General Numbering Mode
Sets all numbers to the decimal starting at 0 or 1 or
hexadecimal format. Classic look and feel.
System
General Pattern Arrangement
Sets the pattern display to the traditional vertical
original, vertical revolver or horizontal display.
Patterns
General Pattern Top Info
Allows the top part of the pattern screen to display
only the track name, additional info or off.
Patterns
General Line In Channel
Selects the audio input of the line in between stereo,
mono left or mono right.
Audio
MIDI Clock In
Sets the source of the master clock, Internal
(default) or external USB or MIDI In jack.
MIDI
MIDI Clock Out
Sets the Tracker Mini clock output. Off, USB, MIDI
Out jack, USB + MIDI Out jack.
MIDI
MIDI Transport In
Sets the source of transport control commands,
Internal (default) or external USB or MIDI In jack.
MIDI
MIDI Transport Out
Sets the output of transport control commands, Off,
USB, MIDI Out jack or USB+MIDI jack options.
MIDI
MIDI Notes In
Sets the input routing of external notes in. Set to Off,
USB, MIDI In jack or USB+MIDI jack options.
MIDI
MIDI Notes Input Channel
Sets the MIDI channel for incoming notes from
external gear. Select All channels or Ch 1-16.
MIDI
MIDI MIDI Out
Sets the MIDI output routing between, Off, USB,
MIDI Out jack or USB+MIDI jack options.
MIDI
MIDI CC In
Sets CC (control change) input routing to Off, USB,
MIDI In jack, USB+MIDI In jack.
MIDI
MIDI CC In channel
Sets MIDI channel for CC (control change) incoming
messages. Select All channels or Ch 1-16.
MIDI
MIDI Middle C
Sets middle C as C-3, C-4, C-5, C-6. Calibrates
range in Tracker with external gear.
MIDI
MIDI Clock Sync Correction
Latency compensation for incoming sync. -6 to +6.
Use with MIDI Jack or USB clock in.
MIDI
Menu Option Description Book Section
Metronome State Turns the metronome on or off for live recording. Projects
Metronome Pre Roll Provides a count in of 4 before starting to record. Projects
Metronome Time signature num Upper numerator of the time signature Projects
Metronome Time signature denum Lower denominator of the time signature Project
Metronome Volume Volume level of metronome Projects
Firmware Firmware Update
Activates a rmware update based on the OS
located on the SD card in the ‘rmware’ folder.
System
Firmware Current version
Displays current version of installed OS. Visual
indicator only.
System
Firmware Build Firmware build version display
Firmware Reset cong
Resets this conguration menu to the default
original settings.
System
Manual - -
Displays the quick start instructions, from the .jpg
images located in the ‘manual’ folder of the SD card.
Architecture
Credits - -
Displays a list of people who supported the
development of Tracker and associated elements.
Projects
3
Projects
3