EasyManua.ls Logo

Polyend Tracker - Page 27

Polyend Tracker
149 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
Polyend Tracker Manual
52
Polyend Tracker Manual
NOTES
Pattern Format
4
Pattern Format
4
▌ EXTENDING PATTERN LENGTH
1. Press [Pattern] to select the pattern mode page.
2. Ensure options page 2 is displayed. Press [More] to toggle between the
two pages of pattern options.
3. Press [Rec] to select recording mode and allow editing. Screen buttons
will be unavailable, shown dim, otherwise.
4. The current pattern can be extended in severals ways. The options
available via the 8 screen buttons are:-
1. Press [Duplicate Pattern]. The pattern will be extended by
duplicating the full pattern along with its steps. Effectively doubles
the pattern length.
2. Press [Expand Pattern]. The pattern will be extended by inserting
additional step rows in-between existing steps. Effectively doubles
by stretching the pattern length.
3. Adjusting [Length] will also increase the pattern length. New empty
step rows added at the end.
5. The [Undo] or [Redo] screen buttons can be used if required to restore
a previous state.
▌ REDUCING PATTERN LENGTH
1. Press [Pattern] to select the pattern mode page.
2. Ensure options page 2 is displayed. Press [More] to toggle between the
two pages of pattern options.
3. Press [Rec] to select recording mode and allow editing. Screen buttons
will be unavailable, shown dim, otherwise.
4. The current pattern can be reduced in severals ways. The options
available via the 8 screen buttons are:-
1. Press [Shrink Pattern]. The pattern will be reduced by deleting each
second step in the pattern. This will delete any step whether empty
or lled. Effectively halves the pattern length.
2. Adjusting [Length] will also reduce the pattern length. Any steps will
be hidden but will be restored if the pattern length is extended.
5. The [Undo] or [Redo] screen buttons can be used if required to restore
a previous state.
Duplicate Pattern
Original Pattern Affected Pattern
Every 2nd Step Deleted Resulting, Halved Pattern
Shrunk Pattern
Double the pattern length
Expand Pattern
Blank steps added after each step
Step 1
Step 1 Step 1 Step 1
Step 1 Step 1
Step 4
Step 33
Step 6 Step 6
Step 32
Step 5 Step 5
Step 32
Step 64
Step 64
Step 2
Step 2 Step 2 Step 2
Step 3
Step 3 Step 3 Step 3
Step 2 Step 2
Step 5
Step 3 Step 3
Step 6
Step 34
Step 7 Step 7
Step 35
Step 8 Step 8
Step …
Step 4 Step 4 Step 4
Step …
Step 63
Step …
Step …
C5 40
----
P 25
C6 40
----
P 25 C6 40
----
P 25 C6 40
----
P 25
C5 40
----
P 25 C5 40
----
P 25
C5 40
----
P 25
C6 40
----
P 25 C6 40
----
P 25
E5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25 C5 40
----
P 25
C6 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25
C5 40
----
P 25
B5 40
----
P 25 B5 40
----
P 25
E5 40
----
P 25 E5 40
----
P 25
+
NOTES

Table of Contents

Other manuals for Polyend Tracker

Related product manuals