7088-8000
-146
The pull-down list for the pipe OD measurement units is displayed, which includes:
!
INCHES
!
MM
(millimeters)
4. Click on the desired measurement unit.
IMPORTANT:
Selecting the measurement unit
INCHES
or
MM
for pipe OD
automatically selects English versus metric units for the following:
!
Pipe OD
!
Pipe wall thickness
!
Liner thickness
!
Transducer spacing
!
Sound speeds for pipe, liner, and fluid
Pipe Wall Thickness
To set the pipe wall thickness:
1. From the
PIPE
options group, click on the
WALL THICKNESS
text box.
2. Enter the pipe wall thickness.
Pipe Material
To select the pipe material:
1. From the
PIPE
options group, click on the down arrow to the right of the
MATERIALS
text box.
The following selections are displayed:
!
CARBON STEEL
!
STAINLESS STEEL
!
CAST IRON
!
DUCTILE IRON
!
COPPER
!
PVC
!
PVDF LOW DENSITY
!
PVDF HI DENSITY
!
ALUMINUM
!
ASBESTOS
!
FIBERGLASS-EPOXY
!
OTHER
2. Click on the desired selection.
To Next Page
Loading...