POLYSONICS DCT-7088 User Manual

7088-8000
-36
Fluid Sound Speed (Menu 21)
This menu is configurable only if
OTHER
was selected
for the fluid type in Menu 20. The fluid sound speed of
the
OTHER
fluid type should be entered in this menu.
(Refer to Appendices C and D for information on fluid
sound speeds.) If
OTHER
was not selected, this menu
is available only by the direct access method and not
by scrolling. In this case, this menu functions as a
view-only display to indicate the fluid sound speed
from the flowmeter’s data base.
Fluid Viscosity (Menu 22)
This menu is configurable only if
OTHER
was selected
for the fluid type in Menu 20. The kinematic viscosity
of the
OTHER
fluid type should be entered in this
menu. (Refer to Appendices C and D for information
on fluid viscosities.) If
OTHER
was not selected, this
menu is available only by the direct access method and
not by scrolling. In this case, this menu functions as a
view-only display to indicate the viscosity of the
selected fluid from the flowmeter’s data base.
3.6.5 TRANSDUCER SETUP MENUS
The
XDUCER
sub-menu contains the setup menus
related to transducer type, mounting method, and
spacing requirements.
Transducer Type (Menu 23)
This menu is used to enter the type of transducer
connected to the flowmeter. The selections are:
!
STANDARD
!
HI-TEMP
STANDARD
should be selected unless the optional
high-temperature transducer blocks are used
(Section 4.5).
Fluid Sound Speed
4863.33 FPS
Fluid Viscosity
1.130 cSt
Transducer Type
*Standard Hi-Temp

POLYSONICS DCT-7088 Specifications

General

Brand	POLYSONICS
Model	DCT-7088
Category	Measuring Instruments
Language	English