7088-8000
-47
Unit ID (Identification) Number (Menu 49)
This menu is used to set the ID (identification) number
of the flowmeter. This number is determined by the
operator and is used to identify the specific instrument
or site. Any whole number between 1 and 60,000 may
be entered with the numeric keypad.
3.6.9 CALIBRATION SETUP MENUS
The
CALIBRATION
sub-menu contains the setup
menus for calibrating the flowmeter, setting the time
and date, and enabling or disabling the sound speed
compensation function.
NOTE:
For information on calibrating the current
loop, refer to Chapter 6.
Calibration Group Menu (Menu 50)
The Calibration Group Menu can be accessed by
scrolling to
CALIBR
on the Main Menu or by directly
accessing Menu 50. This menu is used as a convenient
way to access the individual calibration menus
(Menus 51 through 54). To access the individual
calibration menus, scroll to one of the following
selections in Menu 50 and press
ENTER
:
!
SET ZERO
!
SCALE
!
SS COMP
!
DATE
NOTE:
Menus 51 through 54 can also be directly
accessed by pressing
MENU
and the two digit
address.
Refer to Chapter 5 for detailed information on
calibration.
Unit ID
0
Calibration
!
!!
!
Set Zero
!
!!
!
Scale
To Next Page
Loading...
Need help?
General