7088-8000
-157
F.4.6 FLOW OPTION GROUP
The
FLOW
option group is accessed by clicking on
FLOW
in the Options Column. This
group contains the options related to flow, including flow units, damping, and cutoffs (low
signal and low flow).
Flow Units
Both the volumetric units and the associated time rate (per) units are selectable for flow.
To select the flow units:
1. From the
FLOW
options group, click on the down arrow to the right of the first
UNITS
text box.
The following units are displayed:
!
GALLONS
!
LITERS
!
MGAL
(million gallons)
!
CUBIC FT
!
CUBIC METERS
!
ACRE FT
!
OIL BARRELS
!
LIQUOR BARRELS
!
FEET
!
METERS
2. Click on the desired volumetric unit.
3. Click on the down arrow to the right of the second
UNITS
text box.
The following time rate units are displayed:
!
SEC
!
MIN
!
HOUR
!
DAY
4. Click on the desired time rate unit.
To Next Page
Loading...
Need help?
General