7088-8000
-161
Totalizer Units
The totalizer unit which is selected can be different from the flow rate unit. For example, if
the flow rate is measured in gallons per minute, the totalizer can be measured in millions of
gallons.
To select the totalizer unit:
1. From the
TOTALIZER
options group, click on the down arrow to the right of the
UNITS
text box.
The following selections are displayed:
!
GALLONS
!
LITERS
!
MGAL
(million gallons)
!
CUBIC FT
!
CUBIC METERS
!
ACRE FT
!
OIL BARRELS
!
LIQUOR BARRELS
2. Click on the desired totalizer unit.
Totalizer Multiplier
The totalizer value can be displayed with one of several multiplier values. For example,
700 liters can be displayed as
700
“single liters” (if the multiplier value is
X1
) or
7
“hundreds of liters” (if the multiplier value is
X100
).
NOTE:
The totalizer reading on the flowmeter display is followed by a slash symbol
/
(a
“per” symbol) if a totalizer multiplier other than 1 is selected. For example, a
totalizer value of 2500 cubic meters with a totalizer multiplier of
x100
would be
displayed as:
25 M3/
.
To select the totalizer multiplier:
1. From the
TOTALIZER
options group, click on the down arrow to the right of the
MULTIPLIER
text box.
The following selections are displayed:
!
X 0.01
!
X 0.1
!
X 1
!
X 10
!
X 100
!
X 1000
!
X
10000
To Next Page
Loading...