7088-8000
-42
Net Totalizer (Menu 38)
This menu is used to enable or disable the net totalizer.
The net totalizer provides the difference between the
positive and negative flow values. For example, if
there are 1000 gallons of flow in the negative direction
and 3000 gallons of flow in the positive direction, the
net totalizer indicates 2000 gallons of net flow.
Selecting
ON
enables the net totalizer, while selecting
OFF
disables it.
Positive Totalizer (Menu 39)
This menu is used to enable or disable the positive
totalizer. The positive totalizer tracks the flow that
moves in the positive direction (from the upstream
transducer to the downstream transducer). It is not
affected by flow in the opposite (downstream)
direction. Selecting
ON
enables the positive totalizer,
while selecting
OFF
disables it.
Negative Totalizer (Menu 40)
This menu is used to enable or disable the negative
totalizer. The negative totalizer tracks the flow that
moves in the negative direction (from the downstream
transducer to the upstream transducer). It is not
affected by flow in the opposite (upstream) direction.
Selecting
ON
enables the negative totalizer, while
selecting
OFF
disables it.
Totalizer Reset (Menu 41)
This menu is used to reset one or all of the totalizers.
To reset a totalizer, select one of the following and
press
ENTER
:
!
ALL
(all totalizers)
!
NET
(net totalizer only)
!
POS
(positive totalizer only)
!
NEG
(negative totalizer only)
Net Totalizer
*Off On
Pos. Totalizer
*Off On
Neg. Totalizer
*Off On
Totalizer Reset
!
!!
!
All
!
!!
!
Net
!
!!
!
Pos
!
!!
!
Neg
To Next Page
Loading...
Need help?
General