3. Remove tape and separate the existing and replacement cables. Discard the existing
upper data cable.
Installation
4. Reinstall the left outrigger tube with the replacement upper data cable installed, see
"Outrigger Side Tube Replacement" on page179: Reconnect the upper data cable to
the lower data cable at the lower outrigger tube mount while installing the outrigger
tube.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 103
6 Available Replacement Procedures
Data Cable Replacement
To Next Page
Loading...
Need help?
General
