Precor Precision 400 Series - Page 112

5. Reinstall the console and reconnect the Data , Ground, and Heart Rate cables, see
"Console Replacement" on page93.
6. Reinstall the top shroud display bracket cover, see "Covers and Panels Replace-
ment" on page75.
7. Plug
1
in the power cord and switch the power ON.
8. Start a manual workout and verify that the console powers up and operates normally.
9. Do the Operation Verification tests (see "Operation Verification" on page19) and
return to service.
1
Device power cord connector or electrical cable male connector that is inserted into an
electrical receptacle "outlet" (also called the plug-in).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 104
6 Available Replacement Procedures
Data Cable Replacement