PRISMJET 54 Gen2 - Page 271

PrismJET 54 Gen2 OPERATION MANUAL Maintenance
6.5 Long Storage and Initial Ink Charging 281
b. Press the [>] key on the operation panel.
• “Set1: UserType” is displayed on the operation panel.
c. Press the [+] key or [–] key to select “Set16: Longstore”.
d. Press the [Enter] key on the operation panel.
• “Longstore: Start” is displayed on the operation panel.
• The display enters the Longstore menu.
5.1.16 Longstore menu